Weathermatic - 1'' Valve w/ Flow Control (Slip) - N-100SF-H

*THIS PRODUCT HAS BEEN DISCONTINUED. It has been replaced with the Weathermatic Enduro series valve. - E-100SF

N-100SF-H

1'' Valve - Slip x Slip with Flow Control

FEATURES

• Flow Range - 0.2 to 35 GPM
• 2 year trade warranty and 100% water tested
• 150 PSI (10.3 BAR) rating
• Normally closed valve for water conservation
  
• Unique “reverse flow” design permits equal pressure distribution on both sides of the diaphragm, regardless of line pressure, providing zero stress to prevent “stretching,” a common cause of valve failure.
• Reverse flow design for water conservation in the event of failure
• Diaphragm’s self cleaning ports constantly flex, inhibiting sand and silt from blocking valve action
• Molded shock cone for smooth operation and reduction of water hammer
• Easy-to-use internal manual bleed lever; bleeds valve downstream; has positive stops for open and closed positions
• High efficiency S20P solenoid with stainless steel actuator
• Engineering grade PVC body and Phillips retaining screws
• Non-rising flow control stem throttles valve from full open to closed position on flow control models

ELECTRICAL

• 24VAC/60 Hz
• Inrush: 9.48 VA
• Holding: 5.11 VA

• 24VAC/50 Hz
• Inrush: 10.66 VA
• Holding: 5.97 VA

Do not use nominal voltage ratings listed above for sizing of valve wire.

Manuals & Literature

• Nitro Series Sales Sheet
• Nitro Series Valve Pressure Loss