DRIP IRRIGATION

XF Tee Male Adapter - 17mm x 17 mm x 1/2 in. MPT Operating Pressure: 0 to 50 PSI; If using 60 PSI, clamps will be required. High quality barbs gra...

DIG's 1/4" Barbed Drip Fittings are used in the installation of all brands of 1/4" micro tubing, 1/4" drip line, and 1/4" soaker hose (.140 ID to ....

Specifications Emitter Spacing: 6" (15 cm) 100' Coil (30 m) Nominal flow rates: .52 GPH (2 L/H) at 15 PSI (1 BAR) Dripline color: Brown Dripper co...

The ML 50 Raised Bed Drip Kit is specially designed for planter boxes and vegetable garden layouts, offering a quick and simple solution for wateri...

Use to plug holes in main line or to stop flow out of the end of 1/4" distribution tubing. Strip of 10 plugs

DIG's 1/2" barbed shut-off valves are used for manual control of individual drip-line laterals, drip tubing or micro tubing, and for screen filters...

DIG's 1/4" Barbed Drip Fittings are used in the installation of all brands of 1/4" micro tubing, 1/4" drip line and 1/4" soaker hose (.140 ID to .1...

Barb Coupling Adapter - 17mm x 17mm Operating Pressure: 0 to 50 PSI; If using 60 PSI, clamps will be required. High quality barbs grab tubing for ...

100 feet1/4" Tubing (.170 ID x .250 OD)Maximum Operating Pressure: 60 PSIBlack PolyethyleneContains antioxidant to protect against thermal degradation

Barb Tee Adapter - 17mm x 17mm x 17mm Operating Pressure: 0 to 50 PSI; If using 60 PSI, clamps will be required. High quality barbs grab tubing fo...

Barb Elbow Adapter - 17mm x 17mm Operating Pressure: 0 to 50 PSI; If using 60 PSI, clamps will be required. High quality barbs grab tubing for a s...

16-015, 3/4" in. hose end 16-021, 1/2" in. hose end 16-022, Goff Plug, Strip of 10 Small and large hose ends for easy insertion UV Resistant Made ...

Used to hold 1/2'' Drip Tubing or Dripline in place. 6'' Dripline Staples Required for every 3 Feet of Tubing. 11 Gauge Sold individually - Bag Qu...

DIG's 1/4" barbed shut-off valves are used for manual control of individual drip-line laterals, drip tubing or micro tubing, and for screen filters...

1/2'' (.700'' OD) Compression Coupling Constructed of molded ultraviolet-resistant, high-impact plastic, DIG's Compression Fittings are able to fit...

15-055 Universal Coupling 15-056 Universal Elbow 15-057 Universal Tee Fits .620, .700 and .710 tubing. Three part construction Threaded for nut fo...

1/2'' (.700'' OD) Compression Elbow Constructed of molded ultraviolet-resistant, high-impact plastic, DIG's Compression Fittings are able to fit a ...

1/2'' (.700'' OD) Compression Tee Constructed of molded ultraviolet-resistant, high-impact plastic, DIG's Compression Fittings are able to fit a ra...

3/4″ FHT x MHT Plastic Screen Filter w/ 155 Mesh Poly screen & flush cap DIG’s heavy-duty plastic screen filters with hose thread are commonly...

DIG's one-piece barbed fittings are constructed of corrosion-resistant, UV-protected poly acetal and can withstand the harsh environment, direct su...

XFF Drip Adapter 17mm Barb x 1/2" Male threaded Operating Pressure: 0 to 50 PSI; If using 60 PSI, clamps will be required. Rain Birds 17mm barbed...

25 PSI Preset Pressure Regulator Inlet 3/4 in. FHT x Outlet 3/4 in. MHT "“ (black) DIG's 25 PSI preset pressure regulators (hose thread) are used t...

Specifications Emitter Spacing: 6" (15 cm) 100' Coil (30 m) Nominal flow rates: .52 GPH (2 L/H) at 15 PSI (1 BAR) Dripline color: Black Dripper c...

Micro Spray Jets DIGs Micro Sprayer in 180° spray pattern with a flow rate of up to 14.7 gallons per hour at 30 PSI. Producing a fine spray in a ra...

100 feet1/2" Tubing (.600 ID x .700 OD)Maximum Operating Pressure: 60 PSI DIG's premium quality 1/2" Black Polyethylene Tubing (.600 ID x .700 OD)...

DIG Pressure Compensating (PC) Drip Emitters are designed to produce a consistent flow rate over a pressure range of 10 to 45 PSI. The PC Drip Emit...

DIG's one-piece barbed fittings are constructed of corrosion-resistant, UV-protected poly acetal and can withstand the harsh environment, direct su...

1/4 in. XQ Drip Distribution Tubing - 100 ft. Coil The strongest and most flexible 1/4 inch drip distribution tubing available to position drip em...

Specifications Emitter Spacing: 6" (15 cm) 500' Coil (150 m) Nominal flow rates: .52 GPH (2 L/H) at 15 PSI (1 BAR) Dripline color: Brown Dripper c...

3/4'' (.700'' OD) Compression End Cap Plug - Fits 1/2" .700 OD Drip Irrigation Tubing Constructed of molded ultraviolet-resistant, high-impact plas...

Fits .620, .700 and .710 tubing. Three part construction Threaded for nut for easy assembly UV Resistant Available in three different configuratio...

DIG's 1/4" Barbed Drip Fittings are used in the installation of all brands of 1/4" micro tubing, 1/4" drip line and 1/4" soaker hose (.140 ID to .1...

DIG Adjustable Vortex Micro Sprayer incorporate a 360° spray pattern with a vortex mechanism that spins the water and allows for adjustable flow an...

Techline DL dripline provides maximum uniformity for both subsurface and on-surface installations. The pressure compensating emitters are ideal for...

Connects / Adapts 17mm drip tubing to 1/2" FNPT Thread Pipe DIG's one-piece barbed fittings are constructed of corrosion-resistant, UV-protected po...