DRIP MANIFOLDS

The 6-outlet head can be used to convert an existing 1/2" sprinkler riser to a 6-outlet drip zone. Each outlet may be adjusted by turning the knob ...

The TOP concept is designed for first time installations or retrofitting an existing sprinkler riser into an efficient 12-Outlet drip irrigation sy...

1/4" converter barb is only necessary if 1/4" micro tubing is used. The converter has a compression side to be inserted into the drip head body. Th...

Use the rubber caps to close all unused outlets. Do this by removing the cover and the Mini-Disk filter. Press the rubber caps into the unused outl...

1/4" converter barb is only necessary if 1/4" micro tubing is used. The converter has a compression side to be inserted into the drip head body. Th...

Converts an existing 1/2" sprinkler riser to a 4-outlet, high flow, pressure compensating (PC) drip system. Pressure compensating range: 10-60PSI ...

Converts an existing 1/2" sprinkler riser to a 4-outlet, high flow, pressure compensating (PC) drip system. Pressure compensating range: 10-60PSI ...

TOP 12-Outlet Drip Emitter. 3.3 GPH per outlet. The TOP concept is designed for first time installations or retrofitting an existing sprinkler rise...

Converts an existing 1/2" sprinkler riser to a 4-outlet, high flow, pressure compensating (PC) drip system. Pressure compensating range: 10-60PSI ...

1/4" converter barb is only necessary if 1/4" micro tubing is used. The converter has a compression side to be inserted into the drip head body. Th...

Designed to retrofit a 1/2" sprinkler riser, DIG's TOP 12-outlet drip manifold utilizes extremely accurate, pressure compensating individual and in...

TOP 12-Outlet Drip Emitter. 2.2 GPH per outlet. The TOP concept is designed for first time installations or retrofitting an existing sprinkler ris...

TOP 12-Outlet Drip Emitter. 1 GPH per outlet. The TOP concept is designed for first time installations or retrofitting an existing sprinkler riser ...

Designed to retrofit a 1/2" sprinkler riser, DIG's TOP 12-outlet drip manifold utilizes extremely accurate, pressure compensating individual and in...

TOP 12-Outlet Drip Emitter. .6 GPH per outlet. The TOP concept is designed for first time installations or retrofitting an existing sprinkler riser...

1/4" converter elbow is only necessary if 1/4" micro tubing is used. The converter has a compression side to be inserted into the drip head body. T...

The 6-outlet drip irrigation manifold can be used to convert an existing 1/2" sprinkler riser to a 6-outlet drip zone. Extend 1/4" micro tubing fro...

The 6-outlet drip irrigation manifold can be used to convert an existing 1/2" sprinkler riser to a 6-outlet drip zone. Extend 1/4" micro tubing fro...

Designed to retrofit a 1/2" sprinkler riser, DIG's TOP 12-outlet drip manifold utilizes extremely accurate, pressure compensating individual and in...