DIG - 2 GPH EXL Fogger on 1/2" FNPT - 07-102

$1.29
SKU 07-102

DIG's EXL Series Foggers with a 1/2” base operate at a pressure range of 30 to 70 PSI to produce micro-sized droplets in a small diameter area when mounted above the plant. Higher incoming pressure results in a smaller and finer droplet size. The fogger’s vortex design spins the incoming water into a very fine mist which is useful where overhead cooling or misting is desired, or for plants that require constant moisture. The foggers are ideal for misting and humidifying hanging baskets and planters, as well as hanging above plants for a cooling effect.

Features

  • Supports optimal cooling or humidifying conditions by reducing temperature and increasing humidity
  • Incorporates a vortex design that swirls water droplets into a fine mist
  • Operates in a normal pressure range of 30 to 80 PSI with high uniformity
  • Produces a droplet size of 50 to 100 microns (100 m at 50 PSI)
  • Available in four color-coded Interchangeable nozzles
  • Modular, lightweight and easy to maintain, configure and install
  • Designed without a bridge to prevent dripping
  • Three-part construction with O-ring for a tight seal
  • Available on 1/2" FNPT, 1/4" barb or 10/32" thread
  • Manufactured from superior durable plastics with UV protection for extended life operation

Specifications

  • Flow rate: .8 to 3 GPH (3 to 11.3 L/H)
  • Operating pressure: 35 to 80 PSI (2.4 to 5.5 BAR)
  • Inlet size: 1/4" (4 mm) barb or 10/32" thread
  • Materials:
    • Body and cover: Polyester
    • Nozzels: acetal
    • O-ring: Buna-N
  • Filter requirement: minimum of 200 mesh

Dimensions

  • 1.3" W x 2.3" H (33 mm W x 58 mm H)

You recently viewed

Clear recently viewed